SKH Sticker Application

SKH Sticker Compatibility:

SKH Sticker is compatible with most agricultural chemicals. However, if the desired combination has not been previously used, a compatibility test is recommended.

MIXING:

Fill spray tank ½ full of water and begin agitation. Add this product at agitation level with paddles turning and then follow with other ingredients as directed by label or in the following sequence and continue filling tank: (1) Dry flowables or water dispersing granules, (2) Wettable powders, (3) Flowables, (4) Solutions, (5) Emulsifiable concentrates. Alkaline water promotes the degeneration of certain pesticides. Buffer spray tank solution to a pH below 8.0. Continue agitation until spray solution is completely mixed. If spray solution has been allowed to stand, thoroughly agitate and remix efore application.

RECOMMENDATIONS:

Specific use rates will vary with conditions of application such as water hardness, application method, equipment, spray droplet size, condition of foliage, etc. Also, higher rates than those below may be used if recommended by pesticide labeling. Follow pesticide label directions. However, do not add this product at a rate which exceeds 5% of the finished spray volume.

Ground Application:

With Insecticides and insect growth regulators:
Use 3/4 lb. per 100 gallons of spray solution. With fungicides and herbicides: Use 1-2 lb. per 100 gallons of spray solution.

Aerial Application:

Use 2-3 lb. per acre.